HVAC Fleet Owners Benefit from Owning Combustion Analyzers

In Articles by Robert HesterLeave a Comment

Improving Safety, Efficiency and Customer Service

For new installations and for annual maintenance, the combustion analyzer has become one of the most critical tools of the trade for HVAC professionals. Used for both furnaces and boilers, the basic handheld instrument measures and calculates carbon dioxide, carbon monoxide, oxygen and stack temperature. More advanced models may have added features that provide gas and draft pressures, two temperatures instead of one and the ability to conduct a heat exchanger test. Some even provide Delta-T configurations to measure the temperature differential.

The analyzer provides significant benefits for contractors and for their customers in both the residential and industrial/commercial markets. For fleet owners, working with standardized equipment on a common platform provides operational efficiencies and improved performance that can increase overall profitability in a highly competitive HVAC environment.

Customer Safety

Safety is no doubt the primary reason for using a combustion analyzer. Some problems cannot be detected without the aid of this device. For example, hairline cracks can cause carbon monoxide to leak from furnaces into occupied spaces. The analyzer can detect these leaks and monitor them for danger. This sensitive instrument can pick up the slightest trace of harmful gases that might indicate potential problems down the road. By measuring oxygen levels for installations and through routine maintenance, the technician can produce a proper flame and maintain the right level of carbon monoxide in the stack.

Combustion Efficiency

Efficiency is another key reason for using a combustion analyzer. Routine maintenance ensures that boilers and furnaces are operating at optimal efficiency and not allowing heat to escape through the stack. These accurate measurements can help provide significant fuel cost savings for HVAC customers.

The analyzer also helps technicians work more efficiently. They can quickly diagnose problems and make necessary repairs or adjustments without wasting valuable time.

Product Standardization Benefits Fleet Owners

Successful HVAC fleet owners know that product standardization can provide significant operating benefits and cost savings in capital investments. In the case of combustion analyzers, manufacturers may offer bulk discounts and special offers to buyers. But the benefits go beyond the initial investment.

First and foremost, all the technicians in the fleet are trained on a common platform. Depending on the size of the fleet, the manufacturer may conduct on-site and hands-on group training on the use, care, calibration and maintenance of the combustion analyzer. Regulatory training may also be provided for fleet owners in the commercial/industrial segments.
Working with one family of instruments, technicians can often support each other while in the field—answering questions, solving problems and providing assistance. Working on a common platform, they can also borrow instruments from each other if one is not directly available to them. If the fleet owner needs units with expanded capabilities for specific applications, they can purchase a limited number of more advanced combustion analyzers that can be shared across the fleet.

Standardization is also an added benefit and a selling point for customers. No matter which technician performs the annual service, the customer always receives the same information and data in the same format. Customers are better able to understand and rely on the printed reports they receive every time service is performed. This reliability and consistency provides confidence in the work and professionalism of the entire HVAC fleet.

For fleet owners in the commercial and industrial market, software options can be customized for regulatory and company-specific requirements.

Service & Maintenance Benefits Provided with Common Platform

HVAC contractors can also save time and money on annual maintenance of their combustion analyzers. In the traditional service path, the entire unit can be sent in for annual maintenance.

Some manufacturers offer a sensor replacement program, whereby the owner receives a new pre-calibrated sensor that can be plugged into the unit, keeping it in the field, while simply sending back the old sensor to the manufacturer. Sensor exchange programs keep units operating without costly delays for service and repair.

Annual calibrations should be scheduled at the start of, or just prior to the heating season. To keep the fleet active, common spare parts including probes, printers, paper, water traps and filters should be kept on hand. Owners are advised to be cautious about who performs repairs and maintenance. Direct factory, or factory-authorized service, is the best guarantee that all maintenance and repairs are performed to the highest quality standards.

Fleet owners report that they have seen their business grow with the use of combustion analyzers. Training on a common platform and repetitive experience in the field improves efficiency during calls as work can be done faster and more cost effectively. Analyzers provide immediate combustion performance information to the technician that initiates efficient repairs. The data obtained from the analyzer can help to explain the cost of ownership and energy savings should the furnace or boiler need replacing. Their customers feel safer and more secure knowing that their boilers, furnaces are operating at peak performance.

Investment in Employee Education for an Evolving Industry

As Henry Ford purportedly stated a long time ago, “The only thing worse than training your employees and having them leave is not training them and having them stay.” This is still true today. As more and more of the antiquated low-efficiency units finally get replaced in the field, a highly skilled technical force is needed for new installation, setup, and continued service.

“The only thing worse than training your employees and having them leave is not training them and having them stay.”Henry Ford

The HVAC industry is evolving with technology. Furnace and boiler equipment for residential, commercial and industrial settings are progressing, and so are the tools used to monitor them. Control systems are getting more complex and therefore require specialized understanding of software, systems, and communications protocols. This is highly evident when it comes to integrated building management systems. Facility management is looking closely for real-time problems and regulatory compliance to prevent major repairs and downtime. Any fleet servicing these systems needs to have the best tools in the industry.

Smart homes have integrated many controls that were simple electro-mechanical devices for the last 20-50 years. These new systems are modeled after smaller versions of building management systems in the commercial and industrial markets. Today’s HVAC technician needs to be up to date with the latest technology no matter what market they serve.

Homeowners have more access to real-time data from smart home devices and now have an active interest in combustion efficiency as it relates to their monthly fuel bill. These “smart devices” use furnace efficiency data in combination with data from heating run-time allowing owners to optimize energy savings with the user control programs in the devices. Evidence of furnace efficiency during any service call, “As Found” and “As Left” is important to this customer. Technicians who are able to print these reports for the customer appear proficient and skilled. Using a variety of technology in tools and equipment can make it possible for contractors to download data and schedule repeat customer visits for servicing their appliances.

Properly outfitting a fleet, with high-performance combustion analyzers can provide a competitive advantage. Partnering with the right manufacturers and their extensive networks of training suppliers can make all the difference to your bottom line.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.